37 12 012 Carry out ride height adjustment
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Ride height adjustment must be carried out after the following work:
- Removal/replacement of ride height sensor or its control rod (only necessary on vehicles with air suspension)
- Replacement of EHC control unit (F01/F02/F04/F07/F11/F15/F16/F85/F86)
- Replacement of ICM control unit (Integrated Chassis Management)
Connect diagnosis system.
Switch the ignition on.
Carry out ride height adjustment (menu item: "Service function").
IMPORTANT:
Following ride height adjustment, for vehicles with:
- Run Flat Indicator: Initialize RUN FLAT INDICATOR .
- Tire Pressure Monitor: Perform TIRE PRESSURE CONTROL (RDC) RESET .