37 14 511 Replacing front ride height sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Slacken nut (1).

Tightening torque 37 14 4AZ .

Detach jointed rod (2).

Disconnect plug connection (3).

Release screws (4).

Tightening torque 37 14 2AZ .

Remove ride height sensor to front.

Installation note:

Replace nut (1).

Sensor lever points in direction of travel starting from ride height sensor.

Fig 1: Identifying Jointed Rod, Nut, Screws And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Check headlight adjustment, correct if necessary.