Storage Location

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Extractor (331300)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 0492097 Connector

NOTE: (Basic body) For transmissions S5D 260Z, S5D 310Z and S5D 320Z;Discontinued, only available via complete tool

2 = 0492098 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

3 = 0492099 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

4 = 0492100 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

5 = 0492101 Synchronizing key

NOTE: (Thrust piece (old)) Discontinued, only available via complete tool

6 = 0492102 Synchronizing key

7 = 0492103 Synchronizing key

NOTE: Not available individually. Only via complete tool set

8 = 0492104 Synchronizing key

9 = 0492105 Synchronizing key

NOTE: For rear axle differential and for installing the camshaft sprocket on the crankshaft (M70) Discontinued, only available via complete tool

1 = 0492107 Washer

NOTE: (Disc) Discontinued, only available via complete tool

2 = 0492108 Synchronizing key

NOTE: For pulling the bearing inner race off the drive flange - Series: E36/5 Discontinued, only available via complete tool