Storage Location

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Consisting of:

1 = 0491619 Hose

NOTE: (Line) Pressure hose 1.7 m, connection M12x1.5 - M14x1.5 outer thread/For checking the different converter pressures/transmission: A4S 310R, A4S 270R discontinued, available as part of set of special tools only

2 = 0491620 Connection

NOTE: (Connection) For checking the main pressure (3 HP 22, A5S 310Z) and clutch A (ZF transmission)/transmission: 3 HP 22, A5S 310Z, A5S 560Z and all ZF transmissions Deletion, only available via tool set

3 = 0491621 Connection

NOTE: (Connection) Pipe bend, 145 mm, stretched length 145 mm/transmission: 4 HP 22, 4 HP 24 Deletion, only available via tool set

4 = 0491622 Connection

NOTE: (Connection) Exhaust manifold, 90 mm Straightened length 90 mm Deletion, only available via tool set

5 = 0491623 Screw

NOTE: (Connection) Banjo bolt M20x1.5 - M18x1.5/For checking the converter pressure/transmission: 3 HP 12 Deletion, only available via tool set

6 = 0491624 Connection

NOTE: (Connection) Reducer M24x1.5 - 20x1.5/For checking the main pressure/transmission: 3 HP 20 Deletion, only available via tool set

7 = 0491625 Connection

NOTE: (Connection) Reducer M20x1.5 - M18x1.5/For checking the main pressure (3 HP 12) an converter pressure (3 HP 20)/Transmission: 3 HP 12, 3 HP 20 discontinued, available as part of set of special tools only

8 = 0491626 Screw

NOTE: (Screw) M18x1.5/For closing the engine oil feed pipe when checking the converter pressure/transmission: 3 HP 20 Deletion, only available via tool set

9 = 0491627 Adapter

NOTE: For closing the feed and return lines when checking the main pressure/transmission: 3 HP 22 Deletion, only available via tool set