51 45 195 Removing and installing/replacing bottom right instrument panel trim: Notes

WARNING: Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt tensioners.

IMPORTANT: Operations on pyrotechnical devices may only be carried out by authorized experts.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.

Clamp off BATTERY LEAD FROM NEGATIVE CONNECTION POINT .

Unscrew screw (3) and remove carpet trim (4) by pulling forward.

Release screws (1).

Installation note:

Replace screws.

Tightening torque 51 45 4AZ .

Detach trim panel (2) and drop slightly.

Disconnect plug connections at the back.

Remove trim (2) in direction of arrow.

Fig 1: Removing Carpet Trim