61 34 Removing and installing/replacing 12V socket in front storage compartment (ashtray)

Necessary preliminary tasks:

Disconnect plug connection (1). Unlock plug and pull out of mounting in direction of arrow.

Unlock socket light (2) and pull out.

Expose cable (3).

Installation:

Ensure correct routing of cables.

Fig 1: Pulling Out Plug Out Of Mounting

Courtesy of BMW OF NORTH AMERICA, INC.

Open cap (1) towards top.

Press retaining lugs together with a suitable tool and lift out ashtray light (2).

Fig 2: Pressing Retaining Lugs Together Using Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Remove 12V socket with special tool 61 0 250.

Fig 3: Removing 12V Socket Using Special Tool (61 0 250)

Courtesy of BMW OF NORTH AMERICA, INC.