51 16 000 Removing and installing or replacing mirror on left or right front door

Unclip triangular mirror section trim (1).

Fig 1: Identifying Triangular Mirror Section Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Protect door trim panel as pictured with adhesive tape (1) in work area.

Raise door seal (2) slightly.

Release screws (3), feed out mirror and disconnect associated plug connection.

Tightening torque 51 16 1AZ .

Fig 2: Identifying Adhesive Tape, Door Seal And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Following parts of mirror must not be damaged or missing:

Check function.