12 90 Electronics box, wiring harness
TIGHTENING TORQUE SPECIFICATIONS - ELECTRONICS BOX AND WIRING HARNESS (N53, N55, N55 HYBRID, N63, N57 D30 U/O/T/S 0/1)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Electronics box, lower section on body | N57 D30 U 0/N57 D30 O 0/N57 D30 T 0/N57 D30 O 1/N57 D30 T 1/N57 D30 S 1/N53/N63 | 8 Nm | ||
| 2AZ Electronics box, cover on lower section | N57 D30 U 0/N57 D30 O 0/N57 D30 T 0/N57 D30 O 1/N57 D30 T 1/N57 D30 S 1/N53/N63 | 2.5 Nm | ||
| 3AZ Auxiliary box on heating and air-conditioning unit | N57 D30 U 0/N57 D30 O 0/N57 D30 T 0/N57 D30 O 1/N57 D30 T 1/N57 D30 S 1/N53/N63/S63 B44 T 0 | 2.5 Nm | ||
| 4AZ Supplementary box cover to lower section | N57 D30 U 0/N57 D30 O 0/N57 D30 T 0/N57 D30 O 1/N57 D30 T 1/N57 D30 S 1/N53/N63/S63 B44 T 0 | 2.5 Nm | ||
| 5AZ Earth cable for ignition coils | N53/N55 | 5 Nm | ||
| 6AZ Carrier plate on heating and air-conditioning unit | N53/N55 | 2.5 Nm | ||
| 7AZ Positive battery cable to carrier plate | N53/N55 | M6 | 8 Nm | |
| 8AZ Cable channel to engine block | N53/N55 | M6 | Replace aluminium screws. | 8 Nm |
| 9AZ Earth cable to crankcase lower section | N53/N55 | M8 | Replace aluminium screw. | |
| Jointing torque | 8 Nm | |||
| Angle of rotation | 45 ° | |||
| 10AZ Earth cable to rear cylinder head | N53/N55 | M6 | 8 Nm |