11 21 Crankshaft and Bearings
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - CRANKSHAFT AND BEARINGS
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ |
Torsion damper (hub) to crankshaft (central bolt 12.9) |
N55 |
M18x108 |
Replace screw
Lightly oil screw and thread |
|
| Jointing torque |
100 Nm |
| Torque angle |
270 ° |