11 31 028 Removing and installing/replacing exhaust camshaft (N20)

Special tools required:

11 9 000 .
83 30 0494 362

Necessary preliminary tasks:

Release screws (1).

Tightening torque: 11 31 4AZ .

Fig 1: Identifying Bolts

Courtesy of BMW OF NORTH AMERICA, INC.

Release banjo bolt (1).

Tightening torque: 11 31 9AZ .

Installation note:

Replace sealing rings.

Unclip engine oil pipe (2) from the brackets (see arrows).

Fig 2: Identifying Engine Oil Pipe And Banjo Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque: 11 31 1AZ .

Remove bearing cap (2).

Fig 3: Identifying Bearing Cap And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove roller tappet (1).

Unfasten screws (2).

Tightening torque: 11 31 1AZ .

Remove high-pressure pump bracket (3).

Fig 4: Identifying Roller Tappet, Screws, And High-Pressure Pump Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1 and 2) by half a rotation.

Tightening torque: 11 31 1AZ .

Fig 5: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Marks of intake and exhaust camshafts are different.
Mixing up the intake and exhaust camshaft will result in engine damage .
A = Exhaust camshaft.
E = Intake camshaft

Fig 6: Identifying Exhaust (A) And Intake (E) Camshafts

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Removal on engine:
Set engine to ignition TDC at cylinder No. 1.
Removed cylinder head:
When using special tool 11 9 000 , it will be necessary to remove the aluminum strip.
Order number: 83 30 0494 362

Installation note:

Prior to installation of exhaust camshaft, ensure proper installation position of rocker arm (1).

Fig 7: Identifying Rocker Arm

Courtesy of BMW OF NORTH AMERICA, INC.

Insert exhaust camshaft so that the data code (1) on the mounting flats faces up.

NOTE: Graphic of intake camshaft N43

Fig 8: Locating Camshaft Designation

Courtesy of BMW OF NORTH AMERICA, INC.

The cam (1) at cylinder 4 points downward at an angle.

Fig 9: Identifying Position Of Cam At Cylinder 4

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.