22 11 110 Replacing left engine support arm (N52T, N53)

Necessary preliminary work:

Secure engine in INSTALLATION POSITION
For N53: Remove left charge air duct.
For N52T: Remove THROTTLE BODY .

IMPORTANT: Aluminum screws/bolts must be replaced each time they are released.
Aluminum screws/bolts are permitted with and without color coding (blue).
For reliable identification:
Aluminum screws/bolts are not magnetic.
Jointing torque and angle of rotation must be observed without fail (risk of damage) .

Release screws (1).

Lay holder (2) for wiring harness to one side.

Fig 1: Identifying Lay Holder And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove engine support arm.

Tightening torque 22 11 3AZ .

Installation note:

Replace aluminum screws.

Fig 2: Identifying Engine Support Arm Screws

Courtesy of BMW OF NORTH AMERICA, INC.