61 71 004 Adjusting washer jets for windscreen washer system

Triple nozzle system

Fig 1: Identifying Triple Nozzle System For Windscreen Washer System

Courtesy of BMW OF NORTH AMERICA, INC.

The spray jets should hit the middle of the wiping area.

Adjustment values in mm

A1= 200

A2= 400

B1= 400

B2= 400

C1= 450

C2= 450

D1= 230

D2= 350

E1= 500

E2= 350

F1= 550

F2= 350

NOTE: If necessary, remove adhesive residue from windscreen.

Fill up with washer fluid.

NOTE: Washer jets are preset; in case of customer complaint, the setting can be adjusted as needed.

Changes in the setting must take into account the possible driving situations (high/low speed; with/without washing additive) and must be performed with care.

If necessary, adjust left/right or middle washer jet (1) by way of screw (2).

Fig 2: Identifying Washer Jet And Screw

Courtesy of BMW OF NORTH AMERICA, INC.