61 31 336 Removing and installing/replacing cover for gear selector switch

Necessary preliminary tasks 

• Disconnect NEGATIVE BATTERY CABLE .
• Remove both negative battery cables at F03.
• Remove CENTRE CONSOLE COVER .

Release screws (1) and raise trim for gear selector switch (2) slightly.

Unlock and disconnect plug connection underneath for EMF switch.

Twist cover for gear selector switch (2) 90° and feed out upwards from the gear selector switch.

Fig 1: Identifying Gear Selector Switch And Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Remove SWITCH FOR ELECTROMECHANICAL PARKING BRAKE .