51 35 Power windows, rear
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - POWER WINDOWS, REAR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Door window glass to power window regulator | F06 / F07 | 12 Nm | ||
| With special tool 51 3 240 and Hazet 6290 torque wrench1CT (longer lever arm, heed formula in repair instructions!) | 6.5 Nm | |||
| With special tool 51 3 240 and Hazet 6280 torque wrench1CT (longer lever arm, heed formula in repair instructions!) | 4.7 Nm | |||
| 2AZ Side window, stationary to inner door panel | F06 / F07 | M6 | 7.5 Nm | |
| 3AZ Side window, stationary to door bottom | F06 / F07 | M6 | 7.5 Nm | |
| 4AZ Preloading adjustment | F07 | M8 | 16 Nm | |
| 5AZ Roller sunblind drive to inner door panel | F07 | 3 Nm | ||
| 6AZ Thin well size adjustment | F07 | 9.5 Nm | ||
| 7AZ Window regulator to inner door panel | F06 / F07 | 9.5 Nm | ||
| 8AZ Flat motor to inner door panel/mounting plate | F07 / F06 | 3 Nm | ||
| 9AZ Flat motor holder to inner door panel | F07 | 3 Nm | ||
| 10AZ Mounting plate on inner door panel | F06 | 8 Nm |