51 11 Front bumper
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bumper to air duct, top | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F18 | 4 Nm | ||
| 2AZ Deformation element, top or bottom, to vertical connection | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 11. 8 Nm | ||
| 3AZ Deformation element to engine support | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | M12 | Replace screws | |
| Jointing torque | 80 Nm | |||
| Angle of rotation | 270 ° | |||
| 4AZ Support to deformation element | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F18 / F12 / F13 | Replace screws and nuts | 27 Nm | |
| F25 | M8 | 20 Nm | ||
| 5AZ Carrier to deformation element, bottom | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 11. 8 Nm | ||
| 6AZ Deformation element, bottom, to adapter plate, front axle carrier | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 19 Nm | ||
| 7AZ V-support to deformation element, top | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 19 Nm | ||
| 8AZ Car registration number to bumper | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 1 Nm | ||
| 9AZ Car registration number to bumper (thread repair) | F01 / F02 / F03 / F04 / F07 / F10 / F11 / F12 / F13 / F18 | M5 | 4. 5 Nm | |
| 10AZ Carrier, bottom, to deformation element, bottom | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 11. 8 Nm | ||
| 11AZ Bumper to side wall | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 3 Nm | ||
| 12AZ Bumper to radiator air duct | F25 | 5 Nm |