00-0220 Special tool cabinet

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

0493777 000220 Special tool cabinet MW

NOTE: (Special tool cabinet, length 2 m) Dimensions: (LxHxD) 2.05 m x 2.10 m x 0.65 m For extended accommodation of special tools. [Released]

SI number

00 01 00 (549)

Consisting of:

Fig 1: Identifying Special Tool Cabinet (0493777)

Courtesy of BMW OF NORTH AMERICA, INC.

= 0493778 Base frame
NOTE: (basic frame) Basic frame with roller-blind for constructing a separate 2 m long tool cabinet. NOTE: For an individual order as an attachment frame, the complete delivery specification must aleady be present under order number 00 0 220 Overall length with a mounting frame: 4 m. [Released]
= 0493779 Side wall
NOTE: (side wall) Left side wall. Only required once for constructing the basic frame Discontinued, only available via complete tool [Not available separately]
= 0493780 Side wall
NOTE: (side wall) Right side wall. Only required once for constructing the basic frame Discontinued, only available via complete tool [Not available separately] 4 = 0493781 Special tool board
= 0493781 Special tool board
NOTE: (large special tool board 2 m x 1 m) This special tool board is used as the rear panel of basic and attachment frames and is the basis for large fixed or movable special tool boards. [Released]
= 0493782 Roller sunblind
NOTE: (roller-blind) Lockable Is included in the 00 0 221 delivery specification. This order number is for reordering purposes only. Discontinued, only available via complete tool [cannot be ordered separately]
= 0494126 Frame
NOTE: (Side frame) Only required once for constructing the basic frame Discontinued, only available via complete tool [Not available separately]