51 49 112 Remove and install/replace upper part of loading edge tailgate trim

Necessary preliminary tasks 

• REMOVE TRIM FROM LEFT AND RIGHT  tailgate.

Lift cover lid (1) and loosen screws below.

Tightening torque: 51 49 2AZ .

Fig 1: Identifying Water Gutter, Rivet, Mucket And Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Guide (2) on trim panel (1) must not be damaged, replace trim panel if necessary.

Fig 2: Identifying Clip Mounts And Clamp

Courtesy of BMW OF NORTH AMERICA, INC.