51 49 000 Removing and installing/replacing bottom tailgate trim panel tailgate

Special tools required:

Necessary preliminary tasks

Release screws (1), unclip clamps (2) with special tool 00 9 317 and remove trim panel (3).

Tightening torque: 51 49 1AZ

Fig 1: Identifying Plastic Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clamps (2) on trim panel (1) must not be damaged, replace if necessary

Fig 2: Identifying Plastic Clips, Gasket And Screw Clamp

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Adjust sound insulation (1) in guide (2).

Click on mounting (3).

Fig 3: Identifying Trim Panel, Clips And Screws

Courtesy of BMW OF NORTH AMERICA, INC.