51 16 190 Removing and installing / replacing lock cylinder in center armrest

Necessary preliminary tasks 

• Remove CENTRE CONSOLE TRIM .

Remove front mat insert (1).

Installation: 

Cleanly adjust rubber nipples and lugs of mat insert.

Fig 1: Identifying Center Console Trim Mat

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (2) of lock carrier (1)and remove lock carrier (1) toward the front.

Installation: 

Make sure lock carrier (1) is properly seated.

Fig 2: Identifying Lock Carrier And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

5116190 Removing and installing / replacing lock cylinder in center armrest