51 45 370 Removing and installing (replacing) left decorative strip on dashboard

Special tools required:

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

NOTE: Graphic shows F01.

Carefully remove decorative strip (1) 00 9 317 with special tool and disconnect plug connection behind.

Fig 1: Identifying Instrument Panel Trim Holder And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure clamps (1) are correctly seated on decorative strip (2).

Replace defective clamps.

Replacement

Modify clamps (1).

Fig 2: Identifying Instrument Panel Trim Holder And Screws

Courtesy of BMW OF NORTH AMERICA, INC.