52 16... Replacing upholstery for front seat thigh support

Run thigh support forward as far as possible.

Release screws (1).

Installation note:

Insert screws (1) with Loctite.

Tightening torque 52 10 11AZ.

Fig 1: Identifying Front Seat Screws

G05504268

Courtesy of BMW OF NORTH AMERICA, INC.

Unhook seat cover (1) from marked area.

Remove carrier (2) for thigh support.

Fig 2: Identifying Seat Cover And Carrier

G05504269

Courtesy of BMW OF NORTH AMERICA, INC.

For seat heating optional extra only:

Carefully detach felt (1) from thigh support.

Unfasten plug connection (2) and disconnect.

Installation note:

Ensure correct cable routing.

Remove upholstery from cover.

Fig 3: Identifying Felt And Plug Connection

G05504270

Courtesy of BMW OF NORTH AMERICA, INC.