51 33 Power windows front
TIGHTENING TORQUE SPECIFICATIONS - POWER WINDOWS FRONT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Door window glass to power window regulator | F07 | 12 Nm | ||
| With special tool 51 3 240 and Hazet 6290 torque wrench1CT (longer lever arm, heed formula in repair instructions!) | 6.5 Nm | |||
| With special tool 51 3 240 and Hazet 6280 torque wrench1CT (longer lever arm, heed formula in repair instructions!) | 4.7 Nm | |||
| 2AZ Flat motor to inner door panel | F07 | 9.5 Nm | ||
| 3AZ Window regulator to door body | F07 | M6 | 9.5 Nm | |
| 4AZ Preloading adjustment | F07 | M8 | 16 Nm | |
| 5AZ Trim, B-pillar, to body | F07 / F06 | 2.0 Nm | ||
| 6AZ Thin well size adjustment | F07 | 9.5 Nm |