63 11 550 Removing and installing/replacing the headlight driver module

WARNING: Version with xenon lighting system:
Danger to life due to high voltage!
Therefore disconnect all components from voltage supply before removal.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.

Release screws (1).

Remove cover (2) in direction of arrow.

Fig 1: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 63 12 3AZ .

Remove headlight driver module (2) in direction of arrow.

Fig 2: Removing Headlight Driver Module

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When installing, make sure sealing sleeve (1) is correctly seated.

Fig 3: Identifying Sealing Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Teach in headlight driver module (1) via vehicle diagnosis.

Service functions
Body
Lighting
Learning turn signal indicator