63 17 070 Removing and installing left front fog light
NOTE:
The time value of this job does not include adjustment of the fog lights
. See 63 10 014 ADJUSTING FOG LIGHTS , 63 10... TEST REQUIREMENTS FOR HEADLIGHTS VERTICAL AIM ADJUSTMENT or 51 11 183 REMOVING AND INSTALLING/REPLACING ORNAMENTAL GRILLE FOR BUMPER TRIM (SIDE)
!
Necessary preliminary work
- REMOVE ornamental grille in bumper trim.
Release screws (1).
Tightening torque 63 12 7AZ .
Remove fog light (2) in direction of arrow
IMPORTANT:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
Disconnect plug connection (1) on fog light (2).
Remove fog light (2).
Replacement
- If necessary, turn bulb holder in direction of arrow and remove from fog light (2).
Note BULB TYPE .