63 31... Removing and installing/replacing fibre optic conductor of door panel, top rear

Special tools required:

WARNING: Fibre optic conductors are sensitive (risk of damage). Always handle carefully.

Necessary preliminary tasks

Carefully detach fibre optic conductor (1) from LED module (3) (retainer).

Installation:

LED-module (3) must lock into position (light distribution).

Fig 1: Disconnecting Fibre Optic Conductor From Led Module

Courtesy of BMW OF NORTH AMERICA, INC.

Upper fibre optic conductor

Use special tool 64 1 020 to unclip fibre optic conductor (3) from retaining clips (1) in door panel (2) and remove.

Installation:

The fibre optic conductor (3) must be securely locked in the retaining clips (1) on the door trim panel (2).

Fig 2: Removing Fibre Optic Conductor From Door Panel Retaining Clip Using Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check fibre optic conductor (1) for damage (scratches or cracks), replace if necessary.

Fig 3: Identifying Fibre Optic Conductor

Courtesy of BMW OF NORTH AMERICA, INC.