63 31 180 Replacing LED (optical fibre) for front door trim panel lighting (left or right)

Necessary preliminary tasks 

• Remove front left door trim panel. See 51 41 000 REMOVING AND INSTALLING (REPLACING) FRONT LEFT OR RIGHT DOOR TRIM PANEL .

1. Pull LED module (1) out of bracket (2).
2. Carefully pull LED module (1) from optical fibre (2).

Installation: 

LED module (1) must lock into position (light distribution).

Fig 1: Pulling Led-Module From Fibre Optic Conductor

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, replace faulty UPPER OPTICAL FIBRES .

If necessary, replace faulty STORAGE COMPARTMENT OPTICAL FIBRES .