61 31 321 Removing and installing radio and A/C control panel
IMPORTANT:
Risk of damage!
A hard disk is installed in the Car Information Computer (CIC).
Carry out mechanical work on the CIC and adjacent components with care.
Avoid subjecting the CIC to vibration/shocks.
IMPORTANT:
Read and comply with notes on protection against electrostatic discharge (ESD PROTECTION) .
IMPORTANT:
Carry out installation in a dust-free workshop area only.
To avoid damage, do not touch or dirty the display field.
To avoid damage, do not touch or dirty the display field.
Necessary preliminary tasks:
- Remove FRONT STORAGE COMPARTMENT .
- Remove CENTRE CONSOLE TRIM .
Release screws (1).
Remove radio and IHKA controls (2).
Unlock plug connections behind and disconnect.
IMPORTANT:
Assign keypad depending on optional equipment.
Replacement:
Carry out VEHICLE PROGRAMMING/ENCODING .