65 13 060 Removing and installing/renewing speaker (mid-range speaker, in instrument panel)

Special tools required:

Unclip trim (1) with special tool 00 9 325 from latch mechanisms and remove upwards.

Fig 1: Removing Trim From Latch Mechanisms Using Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Installation :

Marked retaining lugs must not be damaged.

Fig 2: Locating Marked Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Graphic is an example!

Release screws (1).

Remove speaker (2).

Disconnect plug connection underneath and remove speaker (2).

Fig 3: Identifying Speaker And Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.