51 35 Power windows, rear
TIGHTENING TORQUE SPECIFICATIONS - POWER WINDOWS, REAR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Door window glass to power window regulator | F06 / F07 | 12 Nm | ||
| With special tool 51 3 240 and Hazet 6290 torque wrench1CT (longer lever arm, heed formula in repair instructions!) | 6.5 Nm | |||
| With special tool 51 3 240 and Hazet 6280 torque wrench1CT (longer lever arm, heed formula in repair instructions!) | 4.7 Nm | |||
| 2AZ Side window, stationary to inner door panel | F06 / F07 | M6 | 7.5 Nm | |
| 3AZ Side window, stationary to door bottom | F06 / F07 | M6 | 7.5 Nm | |
| 4AZ Preloading adjustment | F07 | M8 | 16 Nm | |
| 5AZ Roller sunblind drive to inner door panel | F07 | 3 Nm | ||
| 6AZ Thin well size adjustment | F07 | 9.5 Nm | ||
| 7AZ Window regulator to inner door panel | F06 / F07 | 9.5 Nm | ||
| 8AZ Flat motor to inner door panel/mounting plate | F07 / F06 | 3 Nm | ||
| 9AZ Flat motor holder to inner door panel | F07 | 3 Nm | ||
| 10AZ Mounting plate on inner door panel | F06 | 8 Nm |