LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 535i GT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment - Special Tools >> Body Equipment >> 51-4100 Tool

51-4100 Tool

0496530 514100 Tool MW

NOTE: (punching tool) For punching the recess for the seat memory switch, when replacing the front and rear door trim Supplied complete in plastic case. [Released]

SI number

01 18 08 (482)

Consisting of:

  1. 13 = 0496783 Die-plate
    NOTE: [Released]
    Fig 1: Identifying Tool (0496530)
    G06876351Courtesy of BMW OF NORTH AMERICA, INC.
  2. 12 = 0496636 Nut
    NOTE: As alternative for 51 4 106 with restricted installation space Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
  3. 14 = 0496784 Tool
    NOTE: Cutting punch for front door seat memory switch [Released]
  4. 11 = 0496550 Hexagon socket
    NOTE: (Hexagon socket wrench) 6 mm Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
  5. 10 = 0496549 Outpusher
    NOTE: (Ejector) For removing residual punched portions from cutting matrix. Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
  6. 9 = 0496548 Tool
    NOTE: (Arc punch) size 12 mm Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
  7. 8 = 0496547 Template
    NOTE: For rear door trim F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
  8. 7 = 0496546 Template
    NOTE: For rear door trim F01 Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
  9. 6 = 0496545 Nut
    NOTE: (Wing nut) M12 Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
  10. 5 = 0496544 Washer
    NOTE: (Thrust washer) Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
  11. 4 = 0496543 Tool
    NOTE: (Cutting punch) top for F01 / F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
  12. 3 = 0496542 Die-plate
    NOTE: (Cutting matrix) bottom for F01 / F02 Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
  13. 2 = 0496541 Tool
    NOTE: (Top yoke) Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
  14. 1 = 0496540 Tool
    NOTE: (Bottom yoke) Only available as part of complete tool set 51 4 100 (83 30 0 496 530). [Not available separately]
scientia non olet · About LEMON Manuals