51 49 027 Removing and installing/replacing all trim for rear lid (central trim)

Necessary preliminary tasks 

• Remove TRIM PANEL FOR REAR WINDOW FRAME ON LEFT AND RIGHT .
• Remove TRIM PANEL FOR REAR LID, SIDE LEFT AND RIGHT .
• Remove REAR LID STORAGE SHELF  part way.

Release screws (3) and clips (2) and remove trim panel (1).

Tightening torque: 51 49 5AZ

Fig 1: Identifying Tailgate, Rear Center Trim, Stop Pad And Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Holders (2) on trim panel (1) must not be damaged.

Fig 2: Identifying Rear Trim Panel And Screws

Courtesy of BMW OF NORTH AMERICA, INC.