51 16 405 Removing and installing/replacing roller sunblind on side window of left or right rear door

Necessary preliminary work 

• Remove REAR DOOR TRIM PANEL .

Release screws (1).

Remove roller sunblind module

Tightening torque, see 51 16 18AZ .

Fig 1: Identifying Roller Sunblind Module Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Check holder (1) for damage. If necessary, replace roller sunblind.

Insert guide rail (2) into guide (3).

Fig 2: Identifying Roller Sunblind Guide, Rail And Holder

Courtesy of BMW OF NORTH AMERICA, INC.

5116405 Removing and installing/replacing roller sunblind on side window of left or right rear door