51 45 195 Removing and installing/replacing trim for lower right instrument panel (ECE only)

Release screw (3) and remove carpet cover (4) towards front.

Release screws (1).

Detach trim panel (2) and drop slightly.

Disconnect plug connections at the back.

Remove trim (2) in direction of arrow.

Fig 1: Locating Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

If necessary, replace retainers (1).

Replacement

Fig 2: Identifying Tweeter And Screws

Courtesy of BMW OF NORTH AMERICA, INC.