51 75 010 Removing and installing/replacing left or right steering assembly cover

Necessary preliminary tasks

Unscrew all bolts.

Tightening torque 51 75 1AZ .

Lever out expanding rivets (1).

Removing steering assembly cover (2).

Installation note:

If necessary, replace faulty expanding rivets (1).

Make sure steering assembly cover (2) is correctly seated.

Fig 1: Identifying Screw Connection On V-Braces (Not For 12-Cylinder Models)

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

From April 09 the snap fasteners are discontinued and renewed by a conventional screw connection.