51 71 480 Removing and installing/replacing cross reinforcement (on rear axle)
IMPORTANT:
Observe safety information for raising the vehicle
Driving without the trailing link is not permitted!
Driving without the trailing link is not permitted!
Necessary preliminary tasks
- Remove TRAILING LINKS ON LEFT AND RIGHT
- RELEASE REAR SILENCER and lower slightly.
Release nuts of heat shield (3) and lower heat shield (3).
Unscrew nuts (1).
Tightening torque 51 61 14AZ .
Unfasten screws (2).
Tightening torque 51 61 13AZ .
Remove cross reinforcement (4).