51 47... Removing and refitting/replacing privacy screen lock (center)

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary tasks

Remove screws from handle casing (1) and lock (2).

Tightening torque 51 47 9AZ .

Maneuver out handle casing and lock.

Fig 1: Identifying Handle Casing And Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Separate lock (3) from return spring (2) of handle casing (1) and set aside.

Fig 2: Identifying Lock, Return Spring And Handle Casing

Courtesy of BMW OF NORTH AMERICA, INC.

Additional work on lock:

Change over buffer stop (1).

Remove screws (2) from fixing bracket (3).

Tightening torque 51 47 10AZ .

Change over fixing bracket (3).

Fig 3: Identifying Buffer Stop, Screws And Fixing Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Additional work on handle casing:

Maneuver out return spring (2).

Maneuver out handle recess (1) from handle casing (3).

Installation:

Retaining lugs and holder for return spring (2) must not be damaged.

Fig 4: Identifying Handle Recess, Casing And Return Spring

Courtesy of BMW OF NORTH AMERICA, INC.