22 11 110 Replacing left engine support arm (N55 Hybrid)
WARNING:
Compliance with the following points is mandatory before beginning work:
- Observe SAFETY INFORMATION for handling hybrid cars
Necessary preliminary tasks:
- Secure engine in INSTALLATION POSITION
- Remove rear UNDERBODY PROTECTION
- Remove left COVER
- Remove rear left CHARGE AIR DUCT
Release screws (3).
Place heat exchanger (4) to one side.
NOTE:
Do not release cooling and transmission line.
Release screws (1).
Remove engine support arm.
Tightening torque 22 11 3AZ .