13 71 170 Removing air duct (N55 Hybrid)
WARNING:
High-voltage system - danger to life!
The following points must be strictly observed prior to starting work :
- Observe SAFETY INFORMATION for handling hybrid cars.
Necessary preliminary tasks:
- Remove CLEAN AIR PIPE .
- Remove COOLANT PUMP .
- Remove COOLANT THERMOSTAT .
Release screw (1).
Tightening torque 13 71 9AZ .
Release screw (2) on exhaust turbocharger.
Tightening torque 13 71 8AZ .
Pull off air duct (3) from exhaust turbocharger, feed out and remove.
Assemble engine.