LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 335is 2D Convertible, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair - E93 >> Floor/Luggage Compartment/Engine Compartment Trim Panels >> 51 47 440 Removing and installing/replacing rear carpet on seat pan

51 47 440 Removing and installing/replacing rear carpet on seat pan

Necessary preliminary tasks 

Version with central bass speaker: 

E92 only: 

Lever out cap (1).

Release bolt (2).

Tightening torque 72 11 5AZ .

Feed out belt and slide bar.

Installation: 

Make sure slide bar and grommet are correctly positioned.

Check that spacer bushing (3) and rubber ring (4) are in correct position.

Fig 1: Identifying Cap, Bolt, Spacer Bushing, And Rubber Ring
G09862199Courtesy of BMW OF NORTH AMERICA, INC.

Remove holder (1).

Pull back cable (2) with cable holder (3).

Feed out carpet (4).

Installation: 

Make sure openings for air duct and attachment points are correctly positioned.

Fig 2: Identifying Holder, Carpet, Cable, And Cable Holder
G09862200Courtesy of BMW OF NORTH AMERICA, INC.