54 37... Checking roof shell seal for leaks

Cover capping and place collecting container underneath.

Fig 1: Placing Collecting Container Underneath

Courtesy of BMW OF NORTH AMERICA, INC.

Middle roof shell seal at corner of case:

Partially check corner of case with water bottle.

Raise sealing lip slightly.

Squirt water at base.

Fig 2: Checking Corner Of Case With Water Bottle

Courtesy of BMW OF NORTH AMERICA, INC.

Middle roof shell seal at S-bend:

Partially check at S-bend with water bottle.

Raise sealing lip slightly.

Squirt water at base.

Fig 3: Identifying Middle Roof Shell Seal At S-Bend

Courtesy of BMW OF NORTH AMERICA, INC.

Check whether water is present in pocket.

NOTE: Middle roof shell is leaking if water is present in pocket.

Fig 4: Checking For Water In Pocket

Courtesy of BMW OF NORTH AMERICA, INC.

Middle roof shell seal at corner of case:

Partially check corner of case with water bottle.

Raise sealing lip slightly.

Squirt water at base.

Fig 5: Checking Corner Of Case With Water Bottle

Courtesy of BMW OF NORTH AMERICA, INC.

Middle roof shell seal at hinge channel:

Partially check seat at hinge channel with water bottle.

Raise sealing lip slightly.

Squirt water at base.

Fig 6: Identifying Middle Roof Shell Seal At Hinge Channel

Courtesy of BMW OF NORTH AMERICA, INC.

Check if water is present in pocket.

NOTE: Middle roof shell is leaking if water is present in pocket.

Fig 7: Checking If Water Is Present In Pocket

Courtesy of BMW OF NORTH AMERICA, INC.

Cowl panel seal in A-pillar area:

Raise sealing lip slightly.

Squirt water at base with water bottle and check for leaks.

NOTE: A-pillar seal is leaking if water is present on inside of marking.

Fig 8: Checking Cowl Panel Seal In A-Pillar Area

Courtesy of BMW OF NORTH AMERICA, INC.