51 23 155 Removing and installing/replacing bar for retaining hook

Necessary preliminary tasks 

• Remove FRONT BUMPER .

Release screws (1) and clips (3).

Remove intake cover (2).

Fig 1: Identifying Intake Cover, Screws And Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on bar (2).

Fig 2: Identifying Bar And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release catches (1) on cooling air guide (2).

Feed out cooling air guide (2) with bar towards front.

Feed bar out of cooling air guide (2).

Fig 3: Removing Cooling Air Guide Catches

Courtesy of BMW OF NORTH AMERICA, INC.