51 32 211 Replacing front left or right rubber guide for left or right door window

Necessary preliminary tasks:

IMPORTANT: INSTRUCTIONS FOR INSTALLATION OF RUBBER WINDOW SEAL are fundamental to this repair instructions and must absolutely be complied with.

Pull rubber window seal (1) out of rear window guide.

Unfasten screws (2).

Push cover (3) downwards slightly and feed out rubber window seal (1) towards the top.

Installation note:

if necessary, replace faulty plastic nuts for screws (2).

Moisten rubber guide (1) prior to fitting with APPROVED LUBRICANT .

Make sure rubber window seal (1) is correctly seated on cover (3).

Fig 1: Identifying Rubber Window Seal, Cover And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Detach rubber window seal (1) in direction of arrow from front door (2).

Installation note:

Moisten rubber guide (1) prior to fitting with APPROVED LUBRICANT .

Make sure rubber guide (1) is correctly seated on door window glass.

Fig 2: Detaching Rubber Guide From Front Door

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Rubber guide (1) must not be damaged in corners (2).

Fig 3: Identifying Rubber Guide And Corners

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Ensure that the rubber window seal (2) is correctly mounted on the window frame (3) and the cover is correctly mounted on the window frame (1).

Fig 4: Identifying Rubber Window Seal And Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

In the area of the inside mirror, ensure that the rubber window seal (1) is correctly mounted on the door (2).

Fig 5: Locating Rubber Window Seal

Courtesy of BMW OF NORTH AMERICA, INC.