LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 135is 2D Convertible, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Self Diagnosis - N55 - Diagnostic Trouble Codes - DTC P1638 (BMW DTC 100001) Through DTC P10EB (BMW DTC 10BA41) >> DTC P16BC; BMW DTC 101408: Throttle valve, adaptation: Initial adaptation, lower limit position not taught in >> Action in service

Action in service

  1. Clear ECU fault memory? Ignition off? Ignition on for at least 1 minute
  2. If fault remains:
    1. 2.a. Check wiring harness DME - throttle valve (sum of throttle-valve voltages must equal 5 V)
    2. 2.b. Check to determine whether foreign objects/matter in the intake manifold or at the throttle valve are preventing the throttle valve from closing
    3. 2.c. Completely close the throttle valve by hand and measures the voltages on the two sensors (S1: 0.5 V +/- tolerance, S2: 4.5 V +/- tolerance)
  3. Replace throttle valve