Condition for fault identification

Test condition:

The fault is recognized when the camshaft cannot be adjusted to the specified position.

Potential problem source(s):

• Contaminated oil passage at VANOS solenoid valve
• Oil pressure too low
• Defective wires or plug terminals on VANOS solenoid valve
• VANOS solenoid valve seized
• VANOS solenoid valve defective

Terminal condition: none

Voltage condition:

• Onboard electrical system voltage between 9 V and 16 V

Temperature condition:

• Engine cold start to ensure that catalyst heater is active.

Time condition:

• None

Other conditions:

• Engine ON