Brake Shoes &/Or Pads: Remove & Replace
WARNING: This page is about the Z4 28i, Automatic Trans, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable).
Includes: Repack Wheel Bearings (where applicable).
DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| All | 1.8 | B | ||
| Front or Rear,Both Sides | 1.0 | B | ||
| Combination Procedure: BRAKE HOSE: Replace: Includes: Bleed Brake System. | ||||
| One | 0.3 | B | ||
| Combination Procedure: BRAKE SYSTEM: Bleed: | ||||
| 0.9 | B | |||
| Combination Procedure: CALIPER: Overhaul: | ||||
| One | DOES NOT include Bleed System. | 0.3 | B | |
| Combination Procedure: CALIPER: Replace: | ||||
| One | DOES NOT include Bleed System. | 0.1 | B | |
| Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle: | ||||
| 0.5 | B | |||
| Combination Procedure: DISC ROTOR: Remove & Install or Remove & Replace: | ||||
| Each,Front | 0.2 | B | ||
| Each,Rear | 0.3 | B | ||
| Combination Procedure: WHEEL BEARING: Replace: | ||||
| 28i, Rear,Both | 5.4 | B | ||
| 28i, Rear,Left Side | 3.6 | B | ||
| 28i, Rear,Right | 2.8 | B | ||
| Front,Both | 1.4 | B | ||
| Front,One Side | 0.8 | B | ||