51 16 000 Removing and installing or replacing mirror on left or right front door

Remove corner trim (2) in upward direction from triangular mirror section (1).

Fig 1: Removing Corner Trim From Triangular Mirror Section

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 51 16 1AZ .

Unlock and disconnect plug (2).

Remove mirror (3).

Fig 2: Identifying Mirror, Plug With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only

Due to the thread-tapping screws, the tightening torque of the new mirror is increased by 2 Nm.

Tightening torque 51 16 1AZ .

Installation:

Check function.