51 13 115 Removing and installing/replacing cowl panel cover

Necessary preliminary tasks

Remove BOTH WINDSCREEN WIPER ARMS

Disengage catch (1).

Fig 1: Removing Catch

G06911590

Courtesy of BMW OF NORTH AMERICA, INC.

Release cable from cable holder (1).

Remove clips (2) and remove cowl panel cover.

Fig 2: Removing Clips

G06911591

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace defective grommets (1).

Check holder (2) for correct seating.

Fig 3: Identifying Defective Grommets With Holder

G04749595

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) must not be missing or damaged.

Retaining tabs (2) must not be damaged

Fig 4: Identifying Clips And Retaining Tabs

G06911593

Courtesy of BMW OF NORTH AMERICA, INC.