51 64 040 Removing and installing/replacing front bumper mounting

Necessary preliminary tasks 

• Remove BUMPER TRIM 
• Remove intake duct on intake silencer housing. See 13 71 000 REMOVING AND INSTALLING/REPLACING INTAKE FILTER HOUSING (N52K) or 13 71 000 REMOVING AND INSTALLING/REPLACING INTAKE FILTER HOUSING (N54)

Release screws (1).

Tightening torque 51 11 2AZ .

V-support (2) remains on vehicle.

Fig 1: Identifying V-Support With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 51 11 1AZ .

Remove bumper mounting (2).

Fig 2: Identifying Bumper Mounting And Screws

Courtesy of BMW OF NORTH AMERICA, INC.