51 64 035 Removing and installing/replacing cross-member upper section (connection of both front wheel arches)

Necessary preliminary tasks 

• Remove intake duct on intake silencer housing. See 13 71 000 REMOVING AND INSTALLING/REPLACING INTAKE FILTER HOUSING (N52K) or 13 71 000 REMOVING AND INSTALLING/REPLACING INTAKE FILTER HOUSING (N54)

Release screws (1).

Tightening torque 51 71 23AZ .

Remove cross-member (2).

Fig 1: Identifying Cross-Member With Screws

Courtesy of BMW OF NORTH AMERICA, INC.