63 14 120 Removing and installing/replacing rear reflector (on rear bumper)

Unclip reflector (1) from bumper trim (2) in area (3).

Pull reflector (1) out of guide and detach towards rear from bumper trim (2).

Fig 1: Identifying Reflector And Bumper Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Catches (1) and guide (2) on rear reflector must not be damaged.

Fig 2: Identifying Catches And Guide On Rear Reflector

Courtesy of BMW OF NORTH AMERICA, INC.